Junos Subscriber Management (JSM)

Juniper Training
  • Duration: 4 days
Categories:

This four-day course is designed to provide students with the knowledge required to configure and manage subscriber management on devices running the Junos operating system. This course focuses on the main configuration components of subscriber management, including subscriber authentication, authorization, and accounting (AAA), Dynamic Host Configuration Protocol (DHCP) local server and DHCP relay/proxy agent, the Point-to-Point Protocol (PPP), subscriber addressing, dynamic profiles, subscriber interfaces, Layer 3 and Layer 2 wholesale services, Pseudowire Head-end Termination (PHT), L2TP, dynamic firewall services, subscriber class of service (CoS), dynamic multicast services, basic NAT and CGN functions, and Subscriber Secure Policy (SSP, or Lawful Intercept). Through demonstrations and hands-on labs, students will gain experience in configuring, monitoring, and troubleshooting subscriber management features on MX Series Universal Edge Routers running the Junos OS.

  • Objectives 0/0

    After successfully completing this course, you should be able to:
    • Describe the fundamentals of subscriber management on a device running the Junos OS, including broadband access design concepts, hardware and software requirements, and configuration components.
    • Configure subscriber AAA.
    • Configure, verify, and troubleshoot extended DHCP local server, extended DHCP relay agent, and DHCP relay proxy mode.
    • Configure dynamic Point-to-Point Protocol over Ethernet (PPPoE) for subscriber access.
    • Configure subscriber addressing.
    • Configure, verify, and troubleshoot dynamic profiles.
    • List predefined Junos variables used in subscriber management.
    • Configure, verify, and troubleshoot static and dynamic virtual LANs (VLANs).
    • Configure, verify, and troubleshoot static and dynamic subscriber interfaces.
    • Describe Layer 2 and Layer 3 wholesale services.
    • Configure and implement Layer 2 and Layer 3 wholesale services.
    • Configure, verify, and troubleshoot pseudowire head-end termination.
    • Configure, verify, and troubleshoot L2TP.
    • Configure, verify, and troubleshoot dynamic firewall services.
    • Configure, verify, and troubleshoot subscriber CoS.
    • Configure, verify, and troubleshoot dynamic multicast services.
    • Configure, verify, and troubleshoot basic NAT functions
    • Configure, verify, and troubleshoot Subscriber Secure Policy (Lawful Intercept).

    No items in this section
  • Course Contents 0/0

    Day 1
    Chapter 1: Course Introduction
    Chapter 2: Introduction to Subscriber Management
    • Overview and Terminology
    • Broadband Access Network Design and Concepts
    • Configuration and Operational Flow
    • Software Licensing
    Chapter 3: Access Management
    • Access Management Overview
    • AAA Services
    • Extended DHCP Local Server
    • Extended DHCP Relay
    • Subscriber Addressing
    • L2TP Subscriber Access
    • Lab 1: Configuring Subscriber Access
    Chapter 4: Subscriber Interfaces and Dynamic Profiles
    • Junos Interfaces Overview
    • VLAN Types
    • Dynamic Profiles
    • Subscriber Interfaces
    • Monitoring and Troubleshooting Tools
    • Lab 2: Configuring Interfaces and Dynamic Profiles
    Day 2
    Chapter 5: Dynamic PPPoE for Subscriber Access
    • PPPoE Overview
    • Dynamic PPPoE Overview and Operational Flow
    • Dynamic PPPoE Interface Configuration
    • PPPoE Service Table Names
    • Lab 3: Configuring Dynamic PPPoE Subscriber Access
    Chapter 6: Layer 3 and Layer 2 Wholesale Services
    • Wholesale Services Overview
    • Layer 3 DHCP Wholesale
    • Layer 3 PPPoE Wholesale
    • Layer 2 Wholesale
    • Lab 4: Configuring Layer 3 Wholesale Services
    Chapter 7: Layer 2 Tunneling Protocol (L2TP)
    • L2TP Overview
    • LAC and LNS Functions
    • LAC Tunnel Selection
    • L2TP Configuration
    • Lab 5: Configuring L2TP for Subscriber Access
    Day 3
    Chapter 8: Pseudowire Head-End Termination (PHT)
    • MPLS Pseudowire for Subscribers
    • Pseudowire Subscriber Interfaces
    • Configuring Hierarchical CoS Pseudowire Subscriber Interfaces
    • Lab 6: Configuring MPLS Pseudowire for Subscribers
    Chapter 9: Subscriber Class of Service
    • Class of Service Overview
    • Traffic Classification, Queuing, and Scheduling
    • Implementing Subscriber Class of Service
    • Monitoring and Troubleshooting Tools
    • Lab 7: Configuring Subscriber Class of Service
    Chapter 10: Dynamic Firewall Services
    • Firewall Filters Overview
    • Implementing Dynamic Firewall Services
    • Monitoring Firewall Filters and Counters
    • Lab 8: Configuring Dynamic Firewall Services
    Day 4
    Chapter 11: Dynamic Multicast Services
    • IGMP Overview
    • Implementing Dynamic Multicast Services
    • Monitoring Multicast and IGMP
    • Lab 7: Configuring Dynamic Multicast Services
    Chapter 12: Carrier Services
    • NAT and CGNAT Services
    • Subscriber Secure Policy (Lawful Intercept)

    No items in this section

Price

$5,638.00

Rating

Not enough ratings to display

Leave a Reply

Your email address will not be published. Required fields are marked *

X